Conversion kinetics of container glass batch melting

Understanding the batch-to-glass conversion process is fundamental to optimizing the performance of glass-melting furnaces and ensuring that furnace modeling can correctly predict the observed outcome when batch materials or furnace conditions change. To investigate the kinetics of silica dissolution, gas evolution, and primary foam formation and collapse, we performed X-ray diffraction, thermal gravimetry, feed expansion tests, and evolved gas analysis of batch samples heated at several constant heating rates. We found that gas evolving reactions, foaming, and silica dissolution depend on the thermal history of the batch in a similar manner: the kinetic parameters of each process were linear functions of the square root of the heating rate. This kinetic similarity reflects the stronger-than-expected interdependence of these processes. On the basis of our results, we suggest that changes in furnace operating conditions, such as firing or boosting, influence the melting rate less than what one would expect without consideration of batch conversion kinetics.     

Thermoset IM-LSI-based C/C-SiC: Influence of flow direction and weld lines on microstructure and mechanical properties

The production of ceramic matrix composites (CMC) based on C/C-SiC is still very cost-intensive and therefore only economical for a few applications. The fabrication of the preforms involves many costs that need to be reduced. In this work, the shaping of the CFRP-preforms is realized by thermoset injection molding, which enables large-scale production. The polymeric matrix used is a multi-component matrix consisting of novolak resin, curing agent and lubricant. Six millimeter chopped carbon fiber with a proportion of 50 wt.% were used as a reinforcement. These ingredients are processed by an industrial equipment for compounding and injection molding in order to manufacture a CFRP demonstrator representing a brake disc. Test specimens are cut out of the demonstrator in different directions in order to investigate influences of flow direction and weld lines on microstructural and mechanical properties. Afterward, the CFRP samples were converted to C/C-SiC composites by the liquid silicon infiltration process. The article addresses the flow behavior of the compound during the injection molding and the building of the weld lines in the demonstrator. In addition, results of the directional dependence of the microstructural and mechanical properties within the fabricated disc in the different production steps are presented.     

一种改进的特征匹配算法在碎片云测量建模中的应用

为满足超高速撞击典型Whipple防护构型的损伤评估需求,利用图像处理技术对碎片云序列阴影图像进行深入研究。使用超高速序列激光阴影成像仪得到三组不同实验条件下碎片云发展过程的高清阴影图像,分别对每组最具代表性的2帧进行图像处理分析;根据碎片云图像特点以及碎片运动特性,提出了一种改进的碎片二次特征匹配算法,该方法包含碎片粗定位、特征定义及初匹配和精确匹配三步策略;通过运用改进的匹配算法,对选取的相邻两帧图片完成碎片高效匹配,并提取匹配碎片的运动参数,进而分析碎片的速度分布和飞行角度分布,获取二次碎片云相关运动特性;得到三组实验各自的轨迹模拟图。根据得到的轨迹分析结果分别对三组实验的后板损伤进行估计,并通过与防护构型的实际损伤结果进行比较,验证了该方法的有效性。     

对大中型钢结构企业生产管理体系的研究分析

以某大型钢结构制造企业为例,通过对产量分布、质量控制、劳动效率等基本数据的分析,研判外协生产管理体系方面存在的问题,从组织形态、管理模式、职能管理等多个维度提出了可行性建议,可为同类型钢结构制造企业提供经验借鉴。     

[Zr0.73(Cu0.59Ni0.41)0.27]87Al13合金过冷液相区热塑性成形研究

为探究[Zr_(0.73)(Cu_(0.59)Ni_(0.41))_(0.27)]_(87)Al_(13)非晶合金的热塑性成形性能以及绘制其对应的热加工图谱,用Gleeble3500型热模拟压缩实验机对该非晶合金进行不同参数下的热模拟压缩实验。结果表明,合金在压缩过程中变形行为由牛顿流变演变为非牛顿流变;同时,过高或过低的热加工温度均能导致合金晶化;进一步对数据分析得到该合金在不同热塑性成形参数下的功率耗散图与流变失稳图,并绘制出相应的热加工谱图,谱图分析结果表明,该合金在温度为420与430℃、应变速率为10~(-3) s~(-1)时具有较高功率耗散系数且没有失稳区域,因此,合金可选的热塑性加工参数为温度420～430℃,应变速率10~(-3) s~(-1)。     

基于多边限定的室内定位方法设计与系统实现

随着基于位置服务（Location Based Services，LBS）的发展与智能移动设备的普及，室内定位算法与系统受到了广泛研究与关注。为提高室内定位精度、增强系统鲁棒性，提出了基于多边限定的fingerprint定位方法。基于Wi-Fi RSSI（Received Signal Strength Indication）信号处理建立离线fingerprint数据库；通过对拟合距离-RSSI函数分析，提出了多边限定的方法确定一个最佳参考点（Reference Point，RP）集合，缩小在线定位阶段的搜索范围。在此基础上，再利用fingerprint定位方法进行定位。此外，实现了基于提出方法的室内定位系统原型用于算法性能评估。通过大量真实场景实验分析、验证了相较于传统fingerprint方法，基于多边限定的fingerprint定位方法能有效提高室内定位精度，增强系统鲁棒性。     

Digital image correlation for strain measurement in plastic film blowing process

Surface deformation study of a polymer film during plastic film blowing (PFB) extrusion process though is considered essential, is difficult to execute as the process is fast and continuous. Digital image correlation (DIC) is an optical technique that is non-destructive, highly accurate and designed to measure deformations from micro to macro scale. DIC can be proposed as a reliable tool to understand the relationship of polymer structure-processing-properties. In this literature, digital image correlation, its basic principle of operation and reliability guided DIC for continuous large deformation are comprehensively explored. Versatility of DIC, and the conditions that affect the measurement algorithm as well as preceding use of DIC in polymer processes are reviewed. The implementation and potential use of DIC in PFB are described.

This review was submitted as part of the 2019 Materials Literature Review Prize of the Institute of Materials, Minerals and Mining run by the Editorial Board of MST. Sponsorship of the prize by TWI Ltd is gratefully acknowledged.     

吐哈盆地葡北地区“两宽一高”地震勘探技术及应用效果

吐哈盆地台北凹陷圈闭落实的准确度和储层分布预测的精度一直是制约该区油气发现的关键因素。通过可控震源“两宽一高”地震采集、OVT域时间偏移、地质导向深度偏移初始模型建立及各向异性深度偏移迭代处理，在地震资料的信噪比、频带宽度和分辨率等方面明显提高的基础上，以高精度层序地层学为指导，基于高分辨率地震资料与钻井、测井资料的综合分析，识别出侏罗系6个三级层序，在三级层序格架内将研究区七克台组底部和三间房组顶部砂体识别为两个连续上升半旋回四级层序；通过构造几何属性分析及精细构造分析，揭示了本区“四带、两凹”的构造格局及形成机制；以宽频带多种反演技术为手段，对含油气层段的七克台组和三间房组砂体分布进行了预测；在综合构造分析、储层分析和油藏成藏规律分析的基础上，提出本区油气沿构造带脊线聚集，断裂系统是油气运移的优势路径，七克台组、三间房组储层在葡北构造带发育，向玉果构造带和胜北次凹减薄尖灭，葡北构造带与玉果构造带结合部位的，具有鼻状构造背景的岩性圈闭是获得油气突破的有利地区。     

Stream-Based Data Sampling Mechanism for Process Object

Process object is the instance of process. Vertexes and edges are in the graph of process object. There are different types of the object itself and the associations between object. For the large-scale data, there are many changes reflected. Recently, how to find appropriate real-time data for process object becomes a hot research topic. Data sampling is a kind of finding c hanges o f p rocess o bjects. There i s r equirements f or s ampling to be adaptive to underlying distribution of data stream. In this paper, we have proposed a adaptive data sampling mechanism to find a ppropriate d ata t o m odeling. F irst o f all, we use concept drift to make the partition of the life cycle of process object. Then, entity community detection is proposed to find changes. Finally, we propose stream-based real-time optimization of data sampling. Contributions of this paper are concept drift, community detection, and stream-based real-time computing. Experiments show the effectiveness and feasibility of our proposed adaptive data sampling mechanism for process object.